PD32KHZ=POWERED, RESET32KHZ=CLEAR_RESET, SAMPLECTRL=RESERVED, BODLVL1=LEVEL_0_INTERRUPT, EN1KHZ=1_KHZ_OUTPUT_DISABLE, EN32KHZ=32_KHZ_OUTPUT_DISABL, ALARMCTRL=RTC_ALARM, WAKEUP0CTRL=INPUT_TO_THE_EVENT_R, WAKEUP1CTRL=INPUT_TO_EVENT_ROUTE, BODLVL2=LEVEL_0_RESET, USB0PHY=ENABLE_USB0_PHY_POWE
Chip configuration register 32 kHz oscillator output and BOD control register.
| EN1KHZ | Enable 1 kHz output. 0 (1_KHZ_OUTPUT_DISABLE): 1 kHz output disabled. 1 (1_KHZ_OUTPUT_ENABLED): 1 kHz output enabled. |
| EN32KHZ | Enable 32 kHz output 0 (32_KHZ_OUTPUT_DISABL): 32 kHz output disabled. 1 (32_KHZ_OUTPUT_ENABLE): 32 kHz output enabled. |
| RESET32KHZ | 32 kHz oscillator reset 0 (CLEAR_RESET): Clear reset. 1 (RESET_ACTIVE): Reset active. |
| PD32KHZ | 32 kHz power control. 0 (POWERED): Powered. 1 (POWERED_DOWN): Powered-down. |
| RESERVED | Reserved |
| USB0PHY | USB0 PHY power control. 0 (ENABLE_USB0_PHY_POWE): Enable USB0 PHY power. 1 (DISABLE_USB0_PHY): Disable USB0 PHY. PHY powered down. |
| ALARMCTRL | RTC_ALARM pin output control 0 (RTC_ALARM): RTC alarm. 1 (EVENT_ROUTER_EVENT): Event router event. 2 (RESERVED): Reserved. 3 (INACTIVE): Inactive. |
| BODLVL1 | BOD trip level to generate an interrupt. See the data sheet for the trip values. 0 (LEVEL_0_INTERRUPT): Level 0 interrupt 1 (LEVEL_1_INTERRUPT): Level 1 interrupt 2 (LEVEL_2_INTERRUPT): Level 2 interrupt 3 (LEVEL_3_INTERRUPT): Level 3 interrupt |
| BODLVL2 | BOD trip level to generate a reset. See the data sheet for the trip values. 0 (LEVEL_0_RESET): Level 0 reset 1 (LEVEL_1_RESET): Level 1 reset 2 (LEVEL_2_RESET): Level 2 reset 3 (LEVEL_3_RESET): Level 3 reset |
| SAMPLECTRL | SAMPLE pin input/output control 0 (RESERVED): Reserved 1 (SAMPLE_OUTPUT_FROM_T): Sample output from the event monitor/recorder. 2 (OUTPUT_FROM_THE_EVEN): Output from the event router. 3 (RESERVED): Reserved. |
| WAKEUP0CTRL | WAKEUP0 pin input/output control 0 (INPUT_TO_THE_EVENT_R): Input to the event router. 1 (OUTPUT_FROM_THE_EVEN): Output from the event router. 2 (RESERVED): Reserved. 3 (INPUT_TO_THE_EVENT_R): Input to the event router. |
| WAKEUP1CTRL | WAKEUP1 pin input/output control 0 (INPUT_TO_EVENT_ROUTE): Input to event router. 1 (OUTPUT_FROM_THE_EVEN): Output from the event router. 2 (RESERVED): Reserved 3 (INPUT_TO_EVENT_ROUTE): Input to event router. |
| RESERVED | Reserved |